Ender 3 with SKR Mini E3 V1.2 mainboard, BLTouch and Trianglelab all metal hotend. SKR-Mini-E3-v1.2-swiss--<date>.bin - Uses Hisens 3950 hotend temp sensor for the Trianglelab Swiss all metal hotend - Default probe offset for Creality BLTouch Mount - Change offset using M851 command and save to EEPROM with M500. - High Speed BLTouch Profile - BLTouch use PROBE port - Max hotend temp set to 295c - Enabled CLASSIC_JERK - Adds G2 / G3 Arc support - Adds G10 / G11 Firmware based retraction (Use M207, M208, M209 to configure) - Adds M73 - Set Print Progress - Adds M125 - Park Head - Adds M412 - Filament Runout sensor on E0-STOP pin (Disable with M412 S0 if you don't have one, Check status with M119, Use the NO pins on your sensor) - Adds M600 - Filament Change (10mm extra purge) - Adds M701 / M702 - Filament load / upload - Adds M900 - Linear Advance - Use this tool to calibrate. Use this video as a guide. - Adds TMC Advanced monitoring (M122, M906, M911, M912) - Adds M914 - Enabled Hybrid Thresholds - FAN_SOFT_PWM enabled to remove fan coil whine of high flow fans - Added support for Meatpack (2020-01-27 onwards) NOTE: BLTouch should be connected to the PROBE port for builds 20200908 onwards. NOTE: If you re-use the stock temp sensor, use the normal version of this firmware.
| Firmware Variant | Size | Build Date | Downloads | Feedback | Download |
|---|---|---|---|---|---|
| SKR-Mini-E3-v1.2-swiss-20250709.bin | 222672 bytes | 2025-07-09 00:24:06 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250708.bin | 222672 bytes | 2025-07-08 00:24:06 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250707.bin | 222672 bytes | 2025-07-07 00:24:03 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250706.bin | 222672 bytes | 2025-07-06 00:24:07 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250705.bin | 222672 bytes | 2025-07-05 00:24:05 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250704.bin | 222672 bytes | 2025-07-04 00:24:14 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250703.bin | 222672 bytes | 2025-07-03 00:24:06 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250702.bin | 222672 bytes | 2025-07-02 00:24:04 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250701.bin | 222672 bytes | 2025-07-01 00:24:05 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250630.bin | 222672 bytes | 2025-06-30 00:24:01 UTC | 0 |
Score: 0
|
Membership Required |
commit dc6f23e435766220b9809b1720f8fc01361b5257 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Sun Jun 29 00:37:16 2025 +0000 [cron] Bump distribution date (2025-06-29) |
|||||
| SKR-Mini-E3-v1.2-swiss-20250629.bin | 222672 bytes | 2025-06-29 00:24:00 UTC | 0 |
Score: 0
|
Membership Required |
commit c7fc6eeb1e8576431efbedd1f52b0c727571f749 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Jun 28 16:36:49 2025 -0500 🚸 Match M920 indexing to M919 |
|||||
| SKR-Mini-E3-v1.2-swiss-20250628.bin | 222672 bytes | 2025-06-28 00:24:02 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250627.bin | 222672 bytes | 2025-06-27 00:24:03 UTC | 0 |
Score: 0
|
Membership Required |
| SKR-Mini-E3-v1.2-swiss-20250626.bin | 222672 bytes | 2025-06-26 00:24:01 UTC | 0 |
Score: 0
|
Membership Required |
commit 72c0437b4813023db70bb70182fb70d98f6cee97 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Wed Jun 25 00:32:59 2025 +0000 [cron] Bump distribution date (2025-06-25) |
|||||
| SKR-Mini-E3-v1.2-swiss-20250625.bin | 222672 bytes | 2025-06-25 00:24:02 UTC | 1 |
Score: 0
|
Membership Required |
commit a6377e5215e4596c7830f5091babf6d3db28d704 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Mon Jun 23 13:18:34 2025 -0500 🐛 Fix misc. build issues |
|||||